Plumbing · high safety risk
Arrange model-specific resin cleaning
Review feed-water iron and the confirmed manual before arranging qualified resin cleaning.
- How often
- 6 months only when the confirmed manual calls for iron-specific cleaning
- Time
- 15 minutes
- Difficulty
- Professional service
- Editorial status
- Published
Before you begin
How to do it
- Confirm the exact model, feed-water test results, manual, and any cleaner program already chosen.
- Review the iron-specific six-month routine separately from optional monthly cleaner use. Agree one appropriate program with a qualified water-treatment professional; do not duplicate the same cleaning.
- Have qualified service select and use the appropriate product under its current label and the exact model manual. Do not mix products, substitute household chemicals, or infer a bleach recipe from this guide.
- Record completed service and the applicable conditions. Set the next date from the accepted manual or professional recommendation.
Stop and get help when
- Leak or overflow
- Wet electrical controls
- Persistent hard water or fault codes
- Unclear cleaner instructions or feed-water conditions
Use a qualified water-treatment professional for feed-water assessment, chemical selection, pressure isolation, internal cleaning, and unresolved faults.
Sources and review
Written by Upkeeping editorial team. Published Upkeeping guidance. Follow your equipment manufacturer’s instructions.